 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 1 single slot smt connectors for card-bus based pc cards ic11s series pc card standard compliant new new wide variety of options (1)board mounting ? standard type ? reverse type (2)eject button type ? rigid button ? foldering button ? pop-up (version 1, 2)button (3)position of eject buttons ? right ? left (4)standoffs ? 0. 0mm ? 2.2mm features 1. pc card standard compliant ? grounding is required to meet the high speed signal requirements of the pc card standard. grounding reliability is achieved with a grounding plate and 8 grounding contacts. ? type , type and type cards are covered. ? terminals for ground clipping are provided. 2. reduced pattern-inhibited area pattern-inhibited area is reduced,compared to our conventional product.in addition, in comparison with version 1, pop-up version 2 has a reduced pattern prohibited area. 3. reduced height connector height is minimized to 5.6mm, making possible thinner product designs. 4. eject mechanism with high-level functionality hirose electric's original ejection mechanism provides an higher degree of card ejection over existing products. this improves the operational qualities of card removal. (patents pending) 5. wide variety of options available ? standard type mounts to the top of the pc board and reverse type mounts on the underside of the board ? three types of eject buttons; rigid, flexible and pop-up.all types can be installed on the right or left side of the ejector. ? available with standoff to utilize space under the connector for mounting other parts. 6. light-weight compared to conventional type, it only weighs 12.7g for standard type (rigid butter, standoff 0mm). also, in comparison with version 1, pop-up version 2 has been made approximately 12% lighter. standard type reverse type reduced height : 5.6mm high
2 product specifications materials smt unit parts insulator ground plate card connected section eject metal fittings terminal material finish finish remarks remarks pps stainless steel phosphor bronze brass contact area: gold plated termination area: tin-lead plated contact area: gold plated termination area: tin-lead plated color : black ul94v-0 description guide plate pushrod eject button eject button rigid button foldering button pop-up version 1 pop-up version 2 body body spring spring pin body frame metal spring pin body spring cam stainless steel stainless steel pbt pbt stainless steel stainless steel pbt stainless steel steel brass steel pbt steel zinc alloy color : black color: black color: black nickel plated color: black ul94v-0 ul94v-0 ul94v-0 m2x0.4 ul94v-0 material item 1.insulation resistance 2.withstanding voltage 3.contact resistance 5. humidity (steady state) 4.vibration 6.temperature cycle 7. durability (insertion/withdrawal) 8. resistance to soldering heat specification conditions 1000m ohms min. no flashover or insulation breakdown. 60m ohms max. (initial value) insulation resistance: 100m ohms min. no electrical discontinuity of 100ns or more insulation resistance: 100m ohms min. variations from initial contact resistance: 20m ohms max. no deformation of components affecting performance. 500v dc 500v ac 1ma temperature: -55 ? ? +5 ? to +35 ? ? +85 ? ? +5 ? to +35 ? duration: 30 --> 5 max. --> 30 --> 5 max. (minutes) 5 cycles 96 hours at temperature of 40? and humidity of 90% to 95% 10000 cycles at 400 to 600 cycles per hour reflow: at the recommended temperature profile manual soldering: 300? for 3 seconds frequency: 10 to 2000 hz, full amplitude of 1.52 mm or acceleration of 147 m/s 2 (peak), 4 hours in each of the 3 directions. note 1: includes temperature rise caused by current flow. note 2: the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature range and humidity range covers non- conducting condition of installed connectors in storage, shipment or during transportation. guide unit ratings current rating 0.5a operating temperature - 55 ? to + 85 ? (note.1) storage temperature - 40 ? to + 70 ? (note.2) voltage rating 125v ac operating humidity relative humidity 95% max. (no condensation) storage humidity 40% to 70%(note.2) nut (note) note: nut is integrated in guide plated of pop-up version 2 connectors. 3 (note.) ic11s series will be used in combination of smt unit with guide unit. when using, please select the same type for the following items. note that other combinations cannot be used. board mounting method: pl : standard type plr : reverse type number of contacts : 68 (note) standoff type blank : none a : 2.2mm series name : ic11s 1.27sf : 1.27mm pitch smt connector (note) with ejector eject button positions r : right l : left lead free spec (71) specification 1 5 6 8 7 7 2 3 4 ic11s a - 68 plr - 1.27sf - ej r ( ( 71 ) ) 1 2 3 6 7 8 4 5 ordering information smt unit guide unit board mounting method bd : standard type bur : reverse type standoff type blank: none a : 2.2mm series name : ic11s eject button type ej : rigid button fej : foldering button pej : pop-up version 1 button pnej : pop-up version 2 button eject button positions r : right l : left 9 12 13 10 11 ic11s a - bur - pnej r 9 10 13 11 12 9 10 11 13 note: 68 and 1.27 are omitted from part number 4 note 1: this figure illustrates grouping of smt unit ( ? ) and guide unit ( ? ) together. note 2: dimensions for card fitting are in accordance with ?c card standard? note 3: indicated dimensions are symmetrical to the center of the card insertion slot. standard right rigid button type 51.5 20.5 5.9 smt unit ( 1 ) guide unit ( 2 ) 7.4 72 no.1 no.2 no.36 no.68 no.34 no.35 no.1 no.2 no.36 no.68 no.34 gnd gnd no.35 54.9 (18.6) (27.6) card fully inserted : 85.6 59 p u s h p u s h c b a 4.8 42.545 p= 0.635 34.4 max 7max 10max eject metal fitting movable range (34.9) 59.5 6 ejector pushed-in for withdrawal: 9 a 3 3 3 standoff type 0mm 2.2mm 640-1007-3 640-1009-9 ic11s-68pl-1.27sf-ejr ic11sa-68pl-1.27sf-ejr 640-1071-2 640-1073-8 ic11s-bd-ejr ic11sa-bd-ejr 3 5.2 5.6 7.8 0.1 2.3 12.7 13.1 smt unit ? cl no. part number guide unit ? a (mm) b (mm) c (mm) weight (g) cl no. part number 5 note 1: this figure illustrates grouping of smt unit ( ? ) and guide unit ( ? ) together. note 2: dimensions for card fitting are in accordance with ?c card standard? note 3: indicated dimensions are symmetrical to the center of the card insertion slot. standard left rigid button type no.1 no.35 no.36 no.2 no.34 no.68 gnd no.1 no.36 no.2 no.35 59 no.34 no.68 gnd guide unit (2) smt unit ( 1 ) 7.4 72 51.5 20.5 5.9 card fully inserted: 85.6 (27.6) (18.6) p u s h p u s h p= 0.635 42.545 59.5 34.4max eject metal fitting movable range 7max 10max ejector pushed-in for withdrawal : 9 6 (34.9) 4.8 a b c a 54.9 3 3 3 standoff type 0mm 2.2mm 640-1008-6 640-1010-8 ic11s-68pl-1.27sf-ejl ic11sa-68pl-1.27sf-ejl 640-1072-5 640-1074-0 ic11s-bd-ejl ic11sa-bd-ejl 3 5.2 5.6 7.8 0.1 2.3 12.7 13.1 smt unit ? cl no. part number guide unit ? a (mm) b (mm) c (mm) weight (g) cl no. part number 6 note 1: this figure illustrates grouping of smt unit ( ? ) and guide unit ( ? ) together. note 2: dimensions for card fitting are in accordance with ?c card standard? note 3: indicated dimensions are symmetrical to the center of the card insertion slot. standard right foldering button type card ejected:(93.6) ejector pushed-in for withdrawal: 9 54.9 no.1 no.35 no.2 no.36 no.34 no.68 smt unit ( 1 ) guide unit ( 2 ) 7.4 20.5 51.5 72 5.9 gnd no.1 no.36 no.2 no.35 59 no.34 no.68 gnd card fully inserted: 85.6 (27.6) (18.6) p u s h p u s h c 5 (10.5) (34.55) (42.05) b a 4.8 59.5 p=0.635 42.545 34.4 max eject metal fitting movable range 7max 10max a a 3 3 standoff type 0mm 2.2mm 640-1007-3 640-1009-9 ic11s-68pl-1.27sf-ejr ic11sa-68pl-1.27sf-ejra 640-1075-3 640-1077-9 ic11s-bd-fejr ic11sa-bd-fejr 3 5.2 5.6 7.8 0.1 2.3 13.1 13.5 smt unit ? cl no. part number guide unit ? a (mm) b (mm) c (mm) weight (g) cl no. part number 7 note 1: this figure illustrates grouping of smt unit ( ? ) and guide unit ( ? ) together. note 2: dimensions for card fitting are in accordance with ?c card standard? note 3: indicated dimensions are symmetrical to the center of the card insertion slot. standard left foldering button type gnd no.1 no.35 no.2 no.36 59 no.68 no.34 gnd smt unit ( 1 ) 7.4 72 51.5 20.5 5.9 guide unit ( 2 ) no.1 no.35 no.36 no.2 no.34 no.68 card ejected:(93.6) card fully inserted : 85.6 (18.6) 9 54.9 p u s h p u s h eject metal fitting movable range 7 max 10 max 34.4max p=0.635 42.545 59.5 4.8 a b c (27.6) 5 ejector pushed-in for withdrawal : (10.5) (34.55) (42.05) a 3 3 3 standoff type 0mm 2.2mm 640-1008-6 640-1010-8 ic11s-68pl-1.27sf-ejl ic11sa-68pl-1.27sf-ejl 640-1076-6 640-1078-1 ic11s-bd-fejl ic11sa-bd-fejl 3 5.2 5.6 7.8 0.1 2.3 13.1 13.5 smt unit ? cl no. part number guide unit ? a (mm) b (mm) c (mm) weight (g) cl no. part number 8 note 1: this figure illustrates grouping of smt unit ( ? ) and guide unit ( ? ) together. note 2: dimensions for card fitting are in accordance with ?c card standard? note 3: indicated dimensions are symmetrical to the center of the card insertion slot. standard right pop-up (version 1) button type 84.5 (ejector pushed-in for withdrawal) dr no.35 no.36 no.2 no.1 no.68 no.34 guide unit (2) 72 smt unit (1) 7.4 51.5 20.5 5.9 54.9 86.4 (card fully inserted) gnd no.68 no.34 59 no.2 no.35 no.36 gnd no.1 p u s h p u s h b a 5 (35.1) 5 59.5 10max 7max eject metal fitting movable range c 34.4 max 42.545 p= 0.635 9.1 a a 3 3 3 standoff type 0mm 2.2mm 640-1007-3 640-1009-9 ic11s-68pl-1.27sf-ejr ic11sa-68pl-1.27sf-ejr 640-1081-6 640-1083-1 ic11s-bd-pejr ic11sa-bd-pejr 3 5.2 5.7 7.9 0.1 2.3 14.7 15.1 smt unit ? cl no. part number guide unit ? a (mm) b (mm) c (mm) weight (g) cl no. part number 9 note 1: this figure illustrates grouping of smt unit ( ? ) and guide unit ( ? ) together. note 2: dimensions for card fitting are in accordance with ?c card standard? note 3: indicated dimensions are symmetrical to the center of the card insertion slot. standard left pop-up (version 1) button type dl no.1 no.35 no.2 no.36 no.68 no.34 guide unit (2) 54.9 72 smt unit (1) 7.4 51.5 20.5 5.9 gnd no.34 no.68 no.36 no.35 no.2 no.1 gnd 59 84.5(ejector pushed-in for withdrawal) 86.4(card fully inserted) c 5 b a 5 (35.1) 59.5 p= 0.635 42.545 34.4 max eject metal fitting movable range 7max 10max 9.1 a p u s h p u s h 3 3 3 standoff type 0mm 2.2mm 640-1008-6 640-1010-8 ic11s-68pl-1.27sf-ejl ic11sa-68pl-1.27sf-ejl 640-1082-9 640-1084-4 ic11s-bd-pejl ic11sa-bd-pejl 3 5.2 5.7 7.9 0.1 2.3 14.7 15.1 smt unit ? cl no. part number guide unit ? a (mm) b (mm) c (mm) weight (g) cl no. part number 10 note 1: this figure illustrates grouping of smt unit ( ? ) and guide unit ( ? ) together. note 2: dimensions for card fitting are in accordance with ?c card standard? note 3: indicated dimensions are symmetrical to the center of the card insertion slot. standard right pop-up (version 2) button type a guide unit ( 2 ) smt unit ( 1 ) 5 b 5 42.545 p=0.635 ( 28.05 ) 7.4 72 51.5 ( 66.25 ) ( 35.05 ) 27.45 11.8 2.35 7 max 10 max 34.4 max eject metal fitting movable range 5.9 59.5 10.1 84.3 (ejector pushed-in for withdrawal) 86.3(card fully inserted) ( 17.55 ) 20.5 no.1 no.35 no.2 no.36 no.34 no.68 59 ndra nr pnl as a 3 3 push push no.1 no.35 no.2 no.36 no.68 no.34 gnd gnd c standoff type 0mm 2.2mm 640-1007-3 640-1009-9 ic11s-68pl-1.27sf-ejr ic11sa-68pl-1.27sf-ejr 640-1251-4 640-1253-0 ic11s-bd-pnejr ic11sa-bd-pnejr 3 5.2 5.6 7.8 0.1 2.3 13.1 13.6 smt unit ? cl no. part number guide unit ? a (mm) b (mm) c (mm) weight (g) cl no. part number 11 note 1: this figure illustrates grouping of smt unit ( ? ) and guide unit ( ? ) together. note 2: dimensions for card fitting are in accordance with ?c card standard? note 3: indicated dimensions are symmetrical to the center of the card insertion slot. standard left pop-up (version 2) button type nl 2.35 59.5 3 ndla eject metal fitting movable range push no.1 no.35 gnd c no.2 no.36 p=0.635 59 3 no.34 42.545 push gnd no.68 7.4 72 11.8 5.9 20.5 7max 10max 84.3(ejector pushed-in for withdrawal) 86.3(card fully inserted) (28.05) (17.55) 34.4max no.35 no.36 no.68 10.1 no.1 no.2 pnr no.34 as 51.5 27.45 5 a b 5 (35.05) (66.25) guide unit (2) smt unit (1) standoff type 0mm 2.2mm 640-1008-6 640-1010-8 ic11s-68pl-1.27sf-ejl ic11sa-68pl-1.27sf-ejl 640-1252-7 640-1254-2 ic11s-bd-pnejl ic11sa-bd-pnejl 3 5.2 5.6 7.8 0.1 2.3 13.1 13.6 smt unit ? cl no. part number guide unit ? a (mm) b (mm) c (mm) weight (g) cl no. part number 12 note 1: this figure illustrates grouping of smt unit ( ? ) and guide unit ( ? ) together. note 2: dimensions for card fitting are in accordance with ?c card standard? note 3: indicated dimensions are symmetrical to the center of the card insertion slot. reverse right rigid button type guide unit ( 2 ) smt unit ( 1 ) no.1 no.35 no.2 no.36 no.34 no.68 51.5 (18.6) 59 6 72 20.5 5.9 54.9 a b no.1 no.35 no.2 no.36 gnd gnd no.68 no.34 card fully inserted:85.6 p u s h p u s h 4.8 c (27.6) 6 (34.9) 7max 10max 34.4 max 42.545 p= 0.635 eject metal fitting movable range 59.5 ejector pushed-in for withdrawal: 9 a 3 3 3 standoff type 0mm 2.2mm 640-1003-2 640-1005-8 ic11s-68plr-1.27sf-ejr ic11sa-68plr-1.27sf-ejr 640-1055-6 640-1057-1 ic11s-bur-ejr ic11sa-bur-ejr 2.7 4.9 5.6 7.8 0.1 2.3 13.1 13.6 smt unit ? cl no. part number guide unit ? a (mm) b (mm) c (mm) weight (g) cl no. part number 13 note 1: this figure illustrates grouping of smt unit ( ? ) and guide unit ( ? ) together. note 2: dimensions for card fitting are in accordance with ?c card standard? note 3: indicated dimensions are symmetrical to the center of the card insertion slot. reverse left rigid button type 59 no.35 no.36 no.2 gnd no.1 no.34 no.68 gnd 54.9 smt unit ( 1 ) guide unit ( 2 ) b a (18.6) card fully inserted:85.6 5.9 72 51.5 20.5 6 no.1 no.35 no.2 no.36 no.34 no.68 p u s h p u s h 42.545 p= 0.635 4.8 (27.6) 59.5 34.4 max eject metal fitting movable range 7max 10max c 6 (34.9) ejector pushed-in for withdrawal:9 a 3 3 3 standoff type 0mm 2.2mm 640-1004-5 640-1006-0 ic11s-68plr-1.27sf-ejl ic11sa-68plr-1.27sf-ejl 640-1056-9 640-1058-4 ic11s-bur-ejl ic11sa-bur-ejl 2.7 4.9 5.6 7.8 0.1 2.3 13.1 13.6 smt unit ? cl no. part number guide unit ? a (mm) b (mm) c (mm) weight (g) cl no. part number 14 note 1: this figure illustrates grouping of smt unit ( ? ) and guide unit ( ? ) together. note 2: dimensions for card fitting are in accordance with ?c card standard? note 3: indicated dimensions are symmetrical to the center of the card insertion slot. reverse right foldering button type b a guide unit ( 2 ) smt unit ( 1 ) 72 51.5 20.5 5.9 6 59 no.35 no.36 no.2 gnd no.1 no.34 no.68 gnd card fully inserted:85.6 (18.6) 54.9 no.1 no.35 no.2 no.36 no.34 no.68 card ejected:( 93.6 ) 9 p u s h p u s h 4.8 42.545 34.4 max p= 0.635 ejector pushed-in for withdrawal: (10.5) eject metal fitting movable range 10max 7max 59.5 ( 27.6 ) c 5 ( 34.55 ) ( 42.05 ) a a 3 3 3 standoff type 0mm 2.2mm 640-1003-2 640-1005-8 ic11s-68plr-1.27sf-ejr ic11sa-68plr-1.27sf-ejr 640-1059-7 640-1061-9 ic11s-bur-fejr ic11sa-bur-fejr 2.7 4.9 5.6 7.8 0.1 2.3 13.5 14 smt unit ? cl no. part number guide unit ? a (mm) b (mm) c (mm) weight (g) cl no. part number 15 note 1: this figure illustrates grouping of smt unit ( ? ) and guide unit ( ? ) together. note 2: dimensions for card fitting are in accordance with ?c card standard? note 3: indicated dimensions are symmetrical to the center of the card insertion slot. reverse left foldering button type gnd no.68 no.34 59 no.35 no.36 no.2 no.1 gnd 54.9 no.68 no.34 no.36 no.2 no.1 no.35 guide unit ( 2 ) b a smt unit ( 1 ) 9 (18.6) card fully inserted:85.6 card ejected:(93.6) 6 20.5 51.5 72 5.9 p u s h p u s h 42.545 p= 0.635 ( 42.05 ) ( 34.55 ) ejector pushed-in for withdrawal:(10.5) 5 ( 27.6 ) 59.5 10max 7max eject metal fitting movable range c 34.4 max 4.8 a 3 3 3 standoff type 0mm 2.2mm 640-1004-5 640-1006-0 ic11s-68plr-1.27sf-ejl ic11sa-68plr-1.27sf-ejl 640-1060-6 640-1062-1 ic11s-bur-fejl ic11sa-bur-fejl 2.7 4.9 5.6 7.8 0.1 2.3 13.5 14 smt unit ? cl no. part number guide unit ? a (mm) b (mm) c (mm) weight (g) cl no. part number 16 note 1: this figure illustrates grouping of smt unit ( ? ) and guide unit ( ? ) together. note 2: dimensions for card fitting are in accordance with ?c card standard? note 3: indicated dimensions are symmetrical to the center of the card insertion slot. reverse right pop-up (version 1) button type p u s h p u s h no.35 no.36 no.1 no.2 no.34 no.68 a b guide unit ( 2 ) 72 5.9 51.5 20.5 6 smt unit ( 1 ) gnd no.68 no.34 59 no.35 no.36 ur no.2 gnd no.1 54.9 86.4 card fully inserted) 84.5 (ejector pushed-in for withdrawal) a 5 42.545 34.4 max p= 0.635 eject metal fitting movable range 10 max 7max 59.5 c (35.1) 5 9.1 a 3 3 3 standoff type 0mm 2.2mm 640-1003-2 640-1005-8 ic11s-68plr-1.27sf-ejr ic11sa-68plr-1.27sf-ejr 640-1065-0 640-1067-5 ic11s-bur-pejr ic11sa-bur-pejr 2.7 4.9 5.6 7.8 0.1 2.3 15.1 15.6 smt unit ? cl no. part number guide unit ? a (mm) b (mm) c (mm) weight (g) cl no. part number 17 note 1: this figure illustrates grouping of smt unit ( ? ) and guide unit ( ? ) together. note 2: dimensions for card fitting are in accordance with ?c card standard? note 3: indicated dimensions are symmetrical to the center of the card insertion slot. reverse left pop-up (version 1) button type ul gnd no.68 no.34 59 no.35 no.2 no.36 gnd no.1 smt unit ( 1 ) 6 20.5 51.5 5.9 72 guide unit ( 2 ) no.68 no.34 no.36 no.2 no.35 no.1 a b 84.5(ejector pushed-in for withdrawal) 86.4(card fully inserted) p u s h p u s h c 10max 7max eject metal fitting movable range 42.545 34.4max p= 0.635 59.5 5 5 (35.1) 9.1 a 3 3 standoff type 0mm 2.2mm 640-1003-2 640-1005-8 ic11s-68plr-1.27sf-ejr ic11sa-68plr-1.27sf-ejr 640-1065-0 640-1067-5 ic11s-bur-pejr ic11sa-bur-pejr 2.7 4.9 5.6 7.8 0.1 2.3 15.1 15.6 smt unit ? cl no. part number guide unit ? a (mm) b (mm) c (mm) weight (g) cl no. part number 18 note 1: this figure illustrates grouping of smt unit ( ? ) and guide unit ( ? ) together. note 2: dimensions for card fitting are in accordance with ?c card standard? note 3: indicated dimensions are symmetrical to the center of the card insertion slot. reverse right pop-up (version 2) button type 42.545 p=0.635 34.4 max 7 max 10 max eject metal fitting movable range 59.5 b 5 5 a 27.45 2.35 ( 35.05 ) ( 66.25 ) 10.1 84.3(ejector pushed-in for withdrawal) 86.3(card fully inserted) 5.9 51.5 20.5 ( 28.05 ) ( 17.55 ) 11.8 72 6 a pnr nura 3 3 59 no.1 no.35 no.2 no.36 gnd gnd no.68 no.34 no.1 no.2 no.36 no.35 no.68 no.34 c guide unit ( 2 ) smt unit ( 1 ) standoff type 0mm 2.2mm 640-1003-2 640-1005-8 ic11s-68plr-1.27sf-ejr ic11sa-68plr-1.27sf-ejr 640-1065-0 640-1067-5 ic11s-bur-pnejr ic11sa-bur-pnejr 2.7 4.9 5.6 7.8 0.1 2.3 13.3 13.7 smt unit ? cl no. part number guide unit ? a (mm) b (mm) c (mm) weight (g) cl no. part number 19 note 1: this figure illustrates grouping of smt unit ( ? ) and guide unit ( ? ) together. note 2: dimensions for card fitting are in accordance with ?c card standard? note 3: indicated dimensions are symmetrical to the center of the card insertion slot. reverse left pop-up (version 2) button type push push a nula ( 66.25 ) 7 max 10 max 42.545 p=0.635 34.4 max eject metal fitting movable range 59.5 b 5 5 a 27.45 2.35 ( 35.05 ) 10.1 84.3(ejector pushed-in for withdrawal) 86.3 (card fully inserted) 5.9 51.5 20.5 ( 28.05 ) ( 17.55 ) 11.8 72 6 3 3 59 no.1 no.35 no.2 no.36 gnd gnd no.68 no.34 no.1 no.2 no.36 no.35 no.68 no.34 c pnl guide unit ( 2 ) smt unit ( 1 ) standoff type 0mm 2.2mm 640-1004-5 640-1006-0 ic11s-68plr-1.27sf-ejl ic11sa-68plr-1.27sf-ejl 640-1256-8 640-1258-3 ic11s-bur-pnejl ic11sa-bur-pnejl 2.7 4.9 5.6 7.8 0.1 2.3 13.3 13.7 smt unit ? cl no. part number guide unit ? a (mm) b (mm) c (mm) weight (g) cl no. part number 20 b pcb mounting pattern standard standoff 2.2mm (common to both right & left buttons) without standoff (left button) 59.50.05 2 50.6max 2 56.85min 2 3.05min 2min 2-?2.2 +0.1 0 no conductive traces shield plate mounting area 7min 58.10.05 4.750.05 (6.6) 52.80.05 54.750.05 mounting section card edge position 22.6max 27.6min mounting section 0.8max (6.6) 17.9min mounting section 0.8max (6.6) 17.9min 4.750.05 4.750.05 54.750.05 54.750.05 card edge position card edge position 34.5 min 30max 52.80.05 48.5max 2 34.5 min 30max 52.80.05 48.5max 2 0.3min 0.3min 0.8max 0.8max 1.6max 58.10.05 31.4min 26.8min 26.8min 21min 21min 31.4min 28.5min 28.5min 7min 7min 58.10.05 1.6max 2min 2min 1 1 2 2 3.05min 27.95max 34.5min 3.05min 27.95max 34.5min 55.9min 59.50.05 2 2 55.9min 59.50.05 shield plate mounting area 2- ?2.2 +0.1 0 shield plate mounting area 2-?2.2 +0.1 0 30 min 30 min without standoff (right button) note1) area and area show the pattern-inhibited area. however area will be the pattern-inhibited area only when guide unit is "ic11s-bd-pej*". note2) indicated dimensions are symmetrical to the centerof the card insertion slot. 21 b pcb mounting pattern pop-up (version 2) button type note1) area show the pattern-inhibited area. note2) indicated dimensions are symmetrical to the center of the card insertion slot. b pcb mounting pattern (enlarged) standard standard 59.50.05 2 50.6max 2 56.85min 2 3.05min 2min 2-?2.2 +0.1 0 no conductive traces shield plate mounting area 7min 58.10.05 4.750.05 (6.6) 52.80.05 54.750.05 mounting section card edge position 22.6max 27.6min mounting section 0.8max (6.6) 17.9min mounting section 0.8max (6.6) 17.9min 4.750.05 4.750.05 54.750.05 54.750.05 card edge position card edge position 34.5 min 30max 52.80.05 48.5max 2 34.5 min 30max 52.80.05 48.5max 2 0.3min 0.3min 0.8max 0.8max 1.6max 58.10.05 31.4min 21min 21min 31.4min 7min 7min 58.10.05 1.6max 2min 2min 2 2 3.05min 3.05min 55.9min 59.50.05 2 2 55.9min 59.50.05 shield plate mounting area 2-?2.2 +0.1 0 shield plate mounting area 2-?2.2 +0.1 0 30 min 30 min without standoff (right button) without standoff (left button) standoff 2.2mm (common to both right and left buttons) 22 reverse standoff 2.2mm (common to both right and left buttons) without standoff (left button) 52.80.05 54.750.05 mounting section 59.50.05 2 50.6max 2 56.85min 2 3.05min 2min no conductive traces shield plate mounting area 7min 56.70.05 4.750.05 (5.2) card edge position 21.2max 26.2min 2-?2.2 +0.1 0 2max 15.2min (5.2) 4.750.05 54.750.05 card edge position shield plate mounting area shield plate mounting area mounting section 60min 2 52.80.05 2max 15.2min (5.2) 4.750.05 54.750.05 card edge position mounting section 60min 2 52.80.05 28.5min 28.5min 26.8min 26.8min 7min 7min 3.05min 3.05min 2min 2min 11 27.95max 34.5min 2 2 50.8max 2 54.6min 59.50.05 27.95max 34.5min 2 2 50.8max 2 54.6min 59.50.05 56.70.05 56.70.05 30.250.05 20.250.05 4.750.05 14.750.05 3.9250.05 12-2min 12-2min 18.450.05 3.9250.05 4.750.05 20.250.05 18.450.05 30.250.05 14.750.05 2-?2.2 + 0 .1 0 2-?2.2 +0.1 0 note1) area and area show the pattern-inhibited area. however area will be the pattern-inhibited area only when guide unit is "ic11s-bd-pej*". note2) indicated dimensions are symmetrical to the centerof the card insertion slot. without standoff (right button) 23 pop-up (version 2) button type note1) area show the pattern-inhibited area. note2) indicated dimensions are symmetrical to the center of the card insertion slot. b pcb mounting pattern (enlarged) reverse reverse 52.80.05 54.750.05 mounting section 59.50.05 2 50.6max 2 56.85min 2 3.05min 2min no conductive traces shield plate mounting area 7min 56.70.05 4.750.05 (5.2) card edge position 21.2max 26.2min 2-?2.2 +0.1 0 2max 15.2min (5.2) 4.750.05 54.750.05 card edge position shield plate mounting area mounting section 60min 2 52.80.05 15.2min 7min 3.05min 2min 2 2 50.8max 2 54.6min 59.50.05 56.70.05 56.70.05 30.250.05 20.250.05 4.75 0.05 14.750.05 3.9250.05 12-2min 18.450.05 2-?2.2 + 0 .1 0 1 without standoff (common to both right & left buttons) standoff 2.2mm (common to both right and left buttons) 24 b installation to the board (standard type) (1) mount the smt unit. (2) position the locking portion of the guide unit over the hole of the smt unit. (3) press the top portion of the lock of the guide unit (until a click sound is heard) to securely engage it with the smt unit. (4) use screws to fasten the guide unit at two places from the rear of the board. note: avoid pressing locations other than the top portion of the lock. failing to do so will result in deformation of the guide plate. m2 screw name 0.4 pitch 1.5 to 2.0(kgf ? cm) recommended torque 25 b installation to the board (reverse type) (1) mount the smt unit. (2) position the locking portion of the guide unit over the hole of the smt unit. position the lock section of guide unit into the hole of smt unit. (3) press the top portion of the lock of the guide unit (until a click sound is heard) to securely engage it with the smt unit. (4) use screws to fasten the guide unit at two places from the rear of the board. note: avoid pressing locations other than the top portion of the lock. failing to do so will result in deformation of the guide plate. m2 screw name 0.4 pitch 1.5~2.0(kgf ? cm) recommended torque 26 b cautions in installation to boards 1. after mounting the smt unit to the board, check that the stroke arm of the smt unit and the push rod of the guide unit are located in the position of photograph 1. (at the time of delivery, these parts are positioned as indicated in the photographs.) please note that reflow cannot be used with the guide unit. 2. note that the units cannot be combined when the stroke arm of the smt unit and the push rod of the guide unit are in the positions indicated in photograph 2. when the aforementioned parts are positioned as indicated in photograph 2, use your finger to move them to the positions indica ted in photograph 1. guide unit smt unit guide unit smt unit photograph 1 photograph 2 stroke arm pushrod 3. after combining the smt unit and the guide unit, they will appear as shown below. guide unit smt unit push rod has been pulled out push rod has been pushed in interference interference 27 b precautions the guide plate has sharp portions because it is made of metal. use due caution when handling because there is the danger of cutting a finger. guide plate is metallic, having some sharp-edged portions. handle carefully to prevent injury to fingers. do not tilt the card up or down a large amount while inserting it. tilting the card could cause connector or card damage. a a 28 b recommended temperature profile |
Price & Availability of IC11SA-68PL-127SF-EJRA
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |